304 Stainless Steel I Beam

304 Stainless Steel I Beam

304 stainless steel I-beam, corrosion-resistant and high-temperature-resistant, high-strength and good toughness, suitable for building frames, bridge structures, and mechanical supports. Available in 10#-50# specifications.
Skicka förfrågan
chatta nu

 

304 Stainless Steel I-Beam is a stainless steel profile with an "H" cross-section, containing 18-20% chromium and 8-10% nickel. It has corrosion resistance (weak acid and alkali resistance, water, air resistance), high strength (tensile strength >= 515MPa) and easy processing. It is widely used in construction, machinery, bridges and other fields, and is suitable for structural support in non-strongly corrosive environments.

SS S30400 I Beam costs less than 316 stainless steel (about 30-50% lower), suitable for budget-sensitive projects.

 

304 SS Cold Rolled I-Beam

 

304 SS Cold Rolled I-Beam

 

304 SS I Beam Chemical Composition

 

C

P

S

N

SS 304

0.08 max

2 max

0.75 max

0.040 max

0.030 max

18 – 20

8 – 11

 

304 Stainless Steel I Beam Mechanical & Physical Properties

 

Yield Strength (0.2% Offset)

8.0 g/cm3

1400℃ (2550℃F)

Psi – 75000, MPa – 515

Psi – 30000, MPa – 205

35%

 

SS 304 I Beam Specifications

 

Structural steel I-beam prices stainless steel i beam small sizes 316 304 321

GB ASTM, JIS, SUS, DIN, EN etc.

201 / 202 / 304 / 304L / 316 / 316L / 309S / 310S / 321 / 409 / 410 / 420 / 430 / 2205 / 904L

0.8mm-25mm

25mm*25mm-200mm*125mm / 50mm*37mm-400mm*104mm

1m-12m, or according to your requests.

Metallurgy, Mineral & Energy.

Mechanical & Manufacture, Steel strcuture, Shipbuilding, Bridging, Automobile Chassis.

304 I channel steel, channel steel, steel channel.

 

304 Stainless Steel I Beam Exporter in China

 

304 Stainless Steel I Beam Exporter in china

 

 

Q: Can 304 stainless steel I-beams be used in seawater environments?

A: Direct contact with seawater is not recommended. 316L stainless steel is recommended for long-term use.

Q: How to distinguish 304 and 316 I-beams?

A: The Mo content can be detected by a spectrometer, or a material report can be requested (304 has no Mo, 316 contains 2-3% Mo).

Q: Can 304 I-beams be welded?

A: Yes, but ER308 welding wire must be used. Annealing is recommended after welding to eliminate stress.

 

Populära Taggar: 304 stainless steel i beam, China 304 stainless steel i beam manufacturers, suppliers, factory, rostfritt stålskruvar, Jag strålar rostfritt stål, rostfritt stål präglad profil, Tillverkare av rostfritt stål I -sektionsbalkar, rostfritt stål Jag formade strålar, Exportör av I-balkar i rostfritt stål

Skicka förfrågan